cts guitar series 24mm potentiometer series 450g 1 - 2 ? 2010 cts corporation. all rights reserved. information subject to change. 08/13/10 cts electrocomponents www.ctscorp.com data sheet rotary potentiometer ? electrocomponents low noise robust construction electrical and mechanical specifications resistance values resistance tolerance power rating 0.25 watts @ 55c rotational angle rotational torque bushing 3/8 C 32 unef stop strength 9 in. lbs. minimum shaft trim push-pull strength of shaft 30 lbs. minimum the cts 450g guitar series potentiometers are the same popular potentiometers used in guitars for years. this new series offers standard constructions for simplified still available upon request. proprietary anti-static lube brass shaft brass bushing smooth feel shaft length features reduced shaft wobble wide selection of tapers various shaft trims resistance tapers see resistance taper chart for available tapers rohs compliant solderable cover
ordering information resistance tapers 2 - 2 08/13/10 cts electrocomponents www.ctscorp.com please consult factory for custom features not listed. ? 2010 cts corporation. all rights reserved. information subject to change. a - 10% b - 20% tolerance resistance code shaft length r round f k slot & knurled torque s - standard l - low torque shaft trim bushing length code resistance 253 25 k 503 50 k 104 100 k 254 250 k 504 500 k 450g 2 - .250 3 - .375 4 - .500 4 - .500 5 - .625 6 - .750 8 - 1.00 24k 4 253 b - flat - - metal shaft, bushing mount, solder lug terminals shaft trim s 105 1 m taper 1 - linear (std. d) 2 - 10% audio (a) 3 - linear (spl. d) 4 - 15% audio (b) 5 - 5% audio (c) 6 - 20% audio (bd) 7 - 25% audio (h) 8 - 30% audio (j) 100 90 80 70 60 50 40 30 20 0 10 10 20 30 40 50 60 70 80 90 100 c a b d b h j d . d t s sp d . l percent rotation percent resistance standard linear and tapered curves (no taps) cts curve no. % resistance @ 50% rotation 50% ! std. d 50% spl. d (eia s curve) 5% c 10% a 15% b 20% bd 25% h 30% j f - flat k - slot & knurled r - round .375 .156 dimension: mm inch mtg. sur face 12.7 max. 3/8-32nef shaft length bushing length ?23.8 .937 11.3 .445 .594 15.1 .781 19.8 max. .804 20.4 .500 3 2 1 wiper 3 1 2 clockwise circuit ccw cw 6.35 .250 dia. 24 teeth .344 .062 dimension: mm inch 3.96 9.53 1.57 8.74 terminal style t - solder lug t ?6.35 .250 ?6.35 .250 ?6.00 .236 5 - .625 6 - .750 7 - .875 9 - 1.125
|
